Do Not Sell My Personal Information Jump to content


fumsinderkidte

Mitglied
  • Gesamte Inhalte

    1
  • Benutzer seit

  • Letzter Besuch

Profile Information

  • Fahrzeug
    Lexus LS430
  • Land
    Deutschland
  • Standort
    Germany
  • Geschlecht
    Männlich

fumsinderkidte's Achievements

Newbie

Newbie (1/14)

  • Conversation Starter

Recent Badges

0

Ansehen in der Community

  1. Hey guys, I recently bought myself and Ls430 2004. After a short time the check engine light came on together with trc off and the check VSC warning. I also noticed that the car does not have constant power and takes a long time to accelerate. Also the gear changes are very rough and chaotic. The car doesn't know which gear to chose at what time. I had an 2001 ls430 before and the gears where so much smoother and the power delivery was perfect so I know what I am talking about here. Also when I rev the car with full power in a parked position it always takes a second for the engine to rev up. Before it revs up it just sounds like if it's clogged or doesn't get enough fuel or something. I went to a mechanic and we checked on the old and it read the two codes P0171 and P0174 left and right bank engine to lean. So I changed the MAF sensor. After changing the MAF it felt like the car was accelerating a bit better without hesitation. Still rough gear changes. Today I checked again if the car would run better with the MAF unplugged. With the MAF unplugged there are a few changes: -When revving the car with full power the rev counter starts to rise without any hesitation -With the MAF plugged in the Rev counter first stutters in the first second (feels clogged) and then starts to rise as normal -also the car shifts a bit cleaner with the MAF unplugged but just a bit. Still a bit of hesitation with acceleration and gear changes -what I also noticed after driving for a bit longer with the MAF plugged in the car even starts to have clogged accelerations so it gets worse when driving for a longer time So maby the MAF works but it gets bad readings because there is a vacuum leak somewhere. When MAF is unplugged a friend told me that it takes some general non related values so that's why it probably rans a bit better when the MAF is unplugged. I hope someone has an idea on what to do next. Thanks to everyone in advance. Cheers Guys
×
×
  • Neu erstellen...

Important Information

Datenschutzerklärung