Sprinter2012 Geschrieben 29. Oktober 2012 Share Geschrieben 29. Oktober 2012 I've been reading a lot on this forum about the supercharger, as you Euro guys seem to know a lot more about the supercharger than the UK people. So I thought I should say hello :) My plan is do build my own supercharger kit, as they are very expensive (£1500-£2000) although it looks like they are much more expensive in Europe though! Here are a few pictures of my IS200... Picture from Japanese Auto Extravaganza (JAE) 2012... Reflective heat tape under the airbox... Engine bay... Legana bumper when it came back from the paintshop... SMD speedo bulbs... MeisterR coilover suspension upgrade... FIGS adapters from the USA using 323mm Supra discs... 0 Zitieren Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Sprinter2012 Geschrieben 29. Oktober 2012 Autor Share Geschrieben 29. Oktober 2012 Some more pictures for you :) Greddy Ti-C cat-back exhaust... Custom LED DRLs in Legana bumper... 0 Zitieren Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
TODDE Geschrieben 29. Oktober 2012 Share Geschrieben 29. Oktober 2012 Welcome to the EU-LOC... You will see - Here are many Owners who can help you... ;) Greets Todde 0 Zitieren Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Sprinter2012 Geschrieben 29. Oktober 2012 Autor Share Geschrieben 29. Oktober 2012 Thanks, Todde :) I've already found the information on what pulley sizes and injectors can be used with the supercharger very helpful. 0 Zitieren Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
RoadRash Geschrieben 29. Oktober 2012 Share Geschrieben 29. Oktober 2012 HAHA JAE..... wow... still can remember to JAE in 2005 as 2 Euro-LOC friends and me did an unbelievable AUT-UK (1.500km) trip there. It was awsome! B) 0 Zitieren Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
eies300 Geschrieben 29. Oktober 2012 Share Geschrieben 29. Oktober 2012 Welcome! Great Car. You have allready good stuff in your car. How much did you pay for MeisterR coilovers? Are they good? :biker: 0 Zitieren Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Sprinter2012 Geschrieben 29. Oktober 2012 Autor Share Geschrieben 29. Oktober 2012 Welcome! Great Car. You have allready good stuff in your car. How much did you pay for MeisterR coilovers? Are they good? :biker: Thanks :) The coilovers were £550 I think, and that was including some special adapters so you can still adjust the damping without taking out the boot carpet. Very good product, well made and performs well. Lots of adjustment for damping, so they are good for the road or for the track. HAHA JAE..... wow... still can remember to JAE in 2005 as 2 Euro-LOC friends and me did an unbelievable AUT-UK (1.500km) trip there. It was awsome! B) It is a good show, we had a member with an IS250 who came from Belgium this year I think. Not as far as you though! 0 Zitieren Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Sprinter2012 Geschrieben 29. Oktober 2012 Autor Share Geschrieben 29. Oktober 2012 Also here are some pictures from my supercharger thread, sorry for posting them twice. But this way all my pictures are together :) 0 Zitieren Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
FreakMR2 Geschrieben 30. Oktober 2012 Share Geschrieben 30. Oktober 2012 nice car - fine condition I like your idea of doing it on your own, we also made a compressor kit that way for a 3S-GE. JAE ... yes we also were there :lol: Guess it was 2009 when we were there at meet our local friends of IMOC. Was a awesome time with some of the best guy's you can meet i guess. Always missing those days. We got the trophy for the longest travel these days, we made a 1700km roadtrip across Europe from the east of austria to wickstead park. With some breaks it took us 26 hours one way :D 0 Zitieren Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
8thsin Geschrieben 30. Oktober 2012 Share Geschrieben 30. Oktober 2012 Nice Legana replica ;) 0 Zitieren Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
IS-Man Geschrieben 30. Oktober 2012 Share Geschrieben 30. Oktober 2012 hey, welcome to our forum, nice job you're doing there, love the legana bumper. But hey just tell us please what kinda smd bulbs you used for your dash illumination and where to find 'em. 0 Zitieren Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Thom@s Geschrieben 30. Oktober 2012 Share Geschrieben 30. Oktober 2012 welcome, nice car :thumbup: greets Tommi 0 Zitieren Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Sprinter2012 Geschrieben 30. Oktober 2012 Autor Share Geschrieben 30. Oktober 2012 (bearbeitet) Thanks for all the comments guys :) hey, welcome to our forum, nice job you're doing there, love the legana bumper. But hey just tell us please what kinda smd bulbs you used for your dash illumination and where to find 'em. The SMD bulbs I used are these ones... 2 x 286/T5 and 3 x 501/T10 Very good quality thick PCB so they do not wobble, not like the cheap plastic holders. I have tried the cheap plastic ones before, and used 3 sets before I found these good ones, they have been on my car over a year with no problems. Nice Legana replica ;) And you may think my bumper is a replaca 8thsin, but it is genuine! :) I have done custom work to chop out the number plate holder, so when I fit an intercooler it does not cover it. And I also put carbon fibre on the centre bar myself because I wanted something different. Here are some pictures of the work to prove it... bearbeitet 30. Oktober 2012 von Sprinter2012 0 Zitieren Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Sprinter2012 Geschrieben 31. Oktober 2012 Autor Share Geschrieben 31. Oktober 2012 Just bought these, which should help me out with my next mod which I'll be purchasing soon... 0 Zitieren Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
RoadRash Geschrieben 1. November 2012 Share Geschrieben 1. November 2012 Just bought these, which should help me out with my next mod which I'll be purchasing soon... But you don't plan to make this... :ph34r: 0 Zitieren Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Is300sportcrossi Geschrieben 4. November 2012 Share Geschrieben 4. November 2012 Hey What can you say about the figs adapter? Are the brakepower now really better? Best regards 0 Zitieren Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Sprinter2012 Geschrieben 4. November 2012 Autor Share Geschrieben 4. November 2012 (bearbeitet) They are a very easy modification to do, takes a couple of hours. You get much better braking force, and less heat build up because of the bigger discs. It also means when you are driving normally the brake pads wear less :) I have posted my guide on how to install them HERE... Also, I'm not sure what the rules are, but I have a pair of the brackets here to sell. Because FIGS sent me two sets to save on postage... bearbeitet 4. November 2012 von Sprinter2012 0 Zitieren Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
eies300 Geschrieben 5. November 2012 Share Geschrieben 5. November 2012 (bearbeitet) -.- I needed them a few months ago -.- Great mod, but it has a small negative attribute. The picture shows the unused area from the 323mm discs. The Supra calipers use whole area, but they are also much more expensive solution. p.s. If you want to sell them, you must open a thread here: http://euro.lexusownersclub.com/forums/index.php?showforum=96 and write the price in the new thread. bearbeitet 5. November 2012 von eies300 0 Zitieren Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Sprinter2012 Geschrieben 5. November 2012 Autor Share Geschrieben 5. November 2012 Yes you are right they do not use the whole surface of the disc, but they still give more force than OEM. I was going to use Supra calipers, but they will not fit under most wheels because they are so big! And as you say, they are also very expensive for a used item. Thanks for the information on selling :) 0 Zitieren Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
eies300 Geschrieben 5. November 2012 Share Geschrieben 5. November 2012 Yes you are right they do not use the whole surface of the disc, but they still give more force than OEM. I was going to use Supra calipers, but they will not fit under most wheels because they are so big! And as you say, they are also very expensive for a used item. Thanks for the information on selling :) Yes you will need special wheel design for your discs. I use the IS 250 Luxury 17" wheels. There are also no problems with the 18" wheels from the IS250 Sport. Which discs and pads do you use? 0 Zitieren Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Sprinter2012 Geschrieben 5. November 2012 Autor Share Geschrieben 5. November 2012 The adapters I have will still fit inside a 17" wheel too which is good because you can use them with OEM wheels. I am just using OEM Toyota Supra TT (323mm) discs with OEM Lexus pads. When the pads wear out I might swap to EBC Greenstuff which should give even more braking power. And if I have some spare money I might get some slotted discs too, but not for a while because they are fine as they are :) 0 Zitieren Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
eies300 Geschrieben 6. November 2012 Share Geschrieben 6. November 2012 I think you will not notice much difference between OEM pads and the Greenstuff pads. The only difference is less production of brake dust. You will need Red oder Yellow stuff for aggressive braking. 0 Zitieren Link zu diesem Kommentar Auf anderen Seiten teilen More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.